EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 10 (2026) Acta Acust., 10 (2026) 39 References
Issue
Acta Acust.
Volume 10, 2026
Topical Issue - New Approaches and Perspectives in Building Acoustics
Article Number 39
Number of page(s) 17
DOI https://doi.org/10.1051/aacus/2026036
Published online 29 May 2026
  1. J.M. Greene, H.R. Hosanna, B. Willson, J.C. Quinn: Whole life embodied emissions and net-zero emissions potential for a mid-rise office building constructed with mass timber. Sustainable Materials and Technologies 35 (2023) e00528. [Google Scholar]
  2. R. Azari, M. Singery: Laminated timber buildings: an overview of environmental impacts, in: A. Sayigh, Ed. The Importance of Wood and Timber in Sustainable Buildings. Springer, Cham, Switzerland, 2022. [Google Scholar]
  3. L. Cremer, M. Heckl: Structure-Borne Sound: Structural Vibrations and Sound Radiation at Audio Frequencies. Springer, Berlin, Heidelberg, Germany, 2005. [Google Scholar]
  4. S. Zoellig, M. Muster, A. Themessl: Butt-joint bonding of timber as a key technology for point-supported, biaxial load bearing flat slabs made of cross-laminated timber, in: Proceedings of Sustainable Built Environment D-A-CH Conference 2019, Graz, Austria. IOP Conference Series: Earth and Environmental Science. Vol. 323, 2019, 012144 pp. [Google Scholar]
  5. S. Zhang, Y.H. Chui: Characterizing flexural behaviour of panel-to-panel connections in cross-laminated timber floor systems. Structures 28 (2020) 2047–2055. [Google Scholar]
  6. F. Morandi, S. De Cesaris, M. Garai, L. Barbaresi: Measurement of flanking transmission for the characterisation and classification of cross laminated timber junctions. Applied Acoustics 141 (2018) 213–222. [Google Scholar]
  7. Z. Li, K.D. Tsavdaridis: Design for seismic resilient cross laminated timber (CLT) structures: a review of research, novel connections, challenges and opportunities. Buildings 13, 2 (2023) 505. [Google Scholar]
  8. S. Vallely, S. Schoenwald: An efficient analytical method to obtain the homogenised frequency-independent elastic material properties of cross-laminated timber elements. Journal of Sound and Vibration 546 (2023) 117424. [Google Scholar]
  9. S. Vallely, S. Schoenwald: Higher-order modal parameter estimation and verification of cross-laminated timber plates for structural-acoustic analyses. Acta Acustica 8 (2024) 52. [Google Scholar]
  10. ISO 12354-1:2017: Building acoustics – Estimation of acoustic performance of buildings from the performance of elements – Part 1: airborne sound insulation between rooms, standard, International Organization for Standardization, Geneva, CH, 2017. [Google Scholar]
  11. C. Guigou Carter, M. Villot: Junction characteristics for predicting acoustic performance of lightweight wood-based buildings, in: Proceedings of Internoise 2015, San Francisco, CA, 2015. [Google Scholar]
  12. C. Guigou Carter, N. Balanant, J.L. Kouyoumji: Acoustic performance investigation of a CLT-based three-floor building. Buildings 13, 8 (2023) 1935. [Google Scholar]
  13. S. Moons, R. Lanoye, E.P. Reynders: Prediction of flanking sound transmission through cross laminated timber junctions with resilient interlayers. Applied Acoustics 228 (2025) 110317. [Google Scholar]
  14. R. Langley, K. Heron: Elastic wave transmission through plate/beam junctions. Journal of Sound and Vibration 143, 2 (1990) 241–253. [Google Scholar]
  15. S. Schoenwald, N. Kumer, S. Wiederin, N. Bleicher, B. Furrer: Application of elastic interlayers at junctions in massive timber buildings, in: Proceedings of International Congress on Acoustics, Aachen, Germany, 2019. [Google Scholar]
  16. M. Izzi, A. Polastri, M. Fragiacomo: Modelling the mechanical behaviour of typical wall-to-floor connection systems for cross-laminated timber structures. Engineering Structures 162 (2018) 270–282. [Google Scholar]
  17. M. Salvalaggio, F. Lorenzoni, M.R. Valluzzi: Impact of sound-insulated joints in the dynamic behavior of cross-laminated timber structures. Journal of Building Engineering 91 (2024) 109525. [Google Scholar]
  18. M. Fragiacomo, B. Dujic, I. Sustersic: Elastic and ductile design of multi-storey crosslam massive wooden buildings under seismic actions. Engineering Structures 33, 11 (2011) 3043–3053. [Google Scholar]
  19. J.A. Steel, R.J.M. Craig: Statistical energy analysis of structure-borne sound transmission by finite element methods. Journal of Sound and Vibration 178, 4 (1994) 553–561. [Google Scholar]
  20. C. Hopkins: Vibration transmission between coupled plates using finite element methods and statistical energy analysis. Part 1: comparison of measured and predicted data for masonry walls with and without apertures. Applied Acoustics 64, 10 (2003)955–973. [Google Scholar]
  21. C. Hopkins, C. Crispin, J. Poblet-Puig, C. Guigou-Carter: Regression curves for vibration transmission across junctions of heavyweight walls and floors based on finite element methods and wave theory. Applied Acoustics 113 (2016) 7–21. [Google Scholar]
  22. A. Esposito, S. Vallely, S. Schoenwald: Modelling cross-laminated timber plate connections: a numerical investigation on flanking sound transmission through angle brackets, in: Proceedings of Forum Acusticum Euronoise 2025, Málaga, Spain, 2025. [Google Scholar]
  23. ISO 10848-1:2017: Acoustics – Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms – Part 1: frame document, International Organization for Standardization, Geneva, CH, 2017. [Google Scholar]
  24. ISO 10848-4:2017: Acoustics – Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms – Part 4: application to junctions with at least one Type A element, International Organization for Standardization, Geneva, CH, 2017. [Google Scholar]
  25. S.V. Modak: Analytical and Experimental Modal Analysis. CRC Press Taylor & Francis Group, Boca Raton, USA, 2023. [Google Scholar]
  26. Ansys® Academic Research Mechanical APDL 2024: Release 24.2, Help System, Theory Reference, ANSYS, Inc. [Google Scholar]
  27. R.J. Allemang: The modal assurance criterion – Twenty years of use and abuse. Sound and Vibration 37, 8 (2003) 14–23. [Google Scholar]
  28. R. Vasile, S.G. Racz, O. Bologa: Experimental and numerical investigations of the steel sheets formability with hydroforming, in: Proceedings of MATEC Web of Conferences CoSME’16, 02016, 2017. [Google Scholar]
  29. Ansys® Academic Research Mechanical APDL 2024: Release 24.2, Help System, Mechanical User’s Guide, ANSYS, Inc. [Google Scholar]
  30. S. Vallely, A. Esposito, S. Schoenwald: Experimental modal analysis of a cross-laminated timber L-junction with a view towards predicting flanking sound transmission, in: Proceedings of Forum Acusticum Euronoise 2025, Málaga, Spain, 2025. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.