Open Access
Acta Acust.
Volume 5, 2021
Article Number 52
Number of page(s) 13
Section Noise Control
Published online 03 December 2021
  1. European Environment Agency: Environmental noise in Europe, 2020. Publications Office, 2020. [Google Scholar]
  2. WHO Regional Office for Europe: Environmental noise guidelines for the European Region. World Health Organization. Regional Office for Europe, 2018. [Google Scholar]
  3. WHO Regional Office for Europe: Burden of disease from environmental noise: Quantification of healthy life years lost in Europe. World Health Organization. Regional Office for Europe, 2011. [Google Scholar]
  4. Conference of European Directors of Roads (CEDR): CEDR Technical Report 2017-02 State of the art in managing road traffic noise: Noise barriers. CEDR Secretariat, 2017. [Google Scholar]
  5. U. Sandberg, J. Ejsmont: Tyre/road noise reference book. INFORMEX, Sweden, 2002. [Google Scholar]
  6. UNECE: Regulation No 117 of the Economic Commission for Europe of the United Nations (UNECE) – Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance. 2016. [Google Scholar]
  7. International Organization for Standardization, ISO 10844:2014: Acoustics – Specification of test tracks for measuring noise emitted by road vehicles and their tyres. Geneva, 2014. [Google Scholar]
  8. T. Berge, U. Sandberg: Five years of eu tyre labelling: Success or failure?, in Proceedings of Internoise. 2017. [Google Scholar]
  9. International Organization for Standardization, ISO 11819-1:1997: Acoustics – Measurement of the influence of road surfaces on traffic noise – Part 1: Statistical Pass-By method. Geneva, 1997. [Google Scholar]
  10. International Organization for Standardization, ISO 11819-2:2017: Acoustics – Method for measuring the influence of road surfaces on traffic noise – Part 2: Close-proximity method. Geneva, 2017. [Google Scholar]
  11. J. Cesbron, P. Klein: Correlation between tyre/road noise levels measured by the coast-by and the close-proximity methods. Applied Acoustics 126 (2017) 36–46. [CrossRef] [Google Scholar]
  12. ASTM International – F09 Committee, ASTM F2493 – 14: Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire. West Conshohocken, Pennsylvania, USA, 2006. [Google Scholar]
  13. E. Bühlmann, G. van Blokland: Temperature effects on tyre/road-noise – A review of empirical research, in Proceedings of Forum Acusticum, 2014. [Google Scholar]
  14. P. Mioduszewski, S. Taryma, R. Wozniak: Temperature influence on tyre/road noise of selected tyres, in Proceedings of Internoise, 2014. [Google Scholar]
  15. E. Bühlmann, U. Sandberg, P. Mioduszewski: Speed dependency of temperature effects on road traffic noise, in Proceedings of Internoise, 2015. [Google Scholar]
  16. U. Sandberg: Standardized corrections for temperature influence on tire/road noise, in Proceedings of Internoise, 2015. [Google Scholar]
  17. U. Sandberg, E. Bühlmann, M. Conter, P. Mioduszewski, R. Wehr: Improving the CPX method by specifying reference tyres and including corrections for rubber hardness and temperature, in Proceedings of Internoise, 2016. [Google Scholar]
  18. R. Wehr, A. Fuchs, C. Aichinger: A combined approach for correcting tyre hardness and temperature influence on tyre/road noise. Applied Acoustics 134 (2018) 110–118. [CrossRef] [Google Scholar]
  19. F. Reinink, G. van Blokland, F. de Roo, G. Derksen: Comparison of CPX systems with Round Robin Test, in Proceedings of Internoise, 2012. [Google Scholar]
  20. P. Peeters, F. Reinink, W. van Vliet: Close proximity (cpx) round robin test 2017, in Proceedings of Euronoise, 2018. [Google Scholar]
  21. T. Vieira, U. Sandberg: Close proximity (CPX) round robin test: Comparison of results from four different CPX trailers measuring noise properties of 10 swedish road surfaces, in Proceedings of Internoise, 2019. [Google Scholar]
  22. F. Wullens, W. Kropp: A three-dimensional contact model for tyre/road interaction in rolling conditions. Acta Acustica United with Acustica 90 (2004) 702–711. [Google Scholar]
  23. P. Andersson, W. Kropp: Time domain contact model for tyre/road interaction including nonlinear contact stiffness due to small-scale roughness. Journal of Sound and Vibration 318, 1 (2008) 296–312. [CrossRef] [Google Scholar]
  24. J. Winroth, W. Kropp, C. Hoever, P. Höstmad: Contact stiffness considerations when simulating tyre/road noise. Journal of Sound and Vibration 409 (2017) 274–286. [CrossRef] [Google Scholar]
  25. W. Kropp, P. Sabiniarz, H. Brick, T. Beckenbauer: On the sound radiation of a rolling tyre. Journal of Sound and Vibration 331, 8 (2012) 1789–1805. [Google Scholar]
  26. G. Dubois, J. Cesbron, H. Yin, F. Anfosso-Lédée, D. Duhamel: Statistical estimation of low frequency tyre/road noise from numerical contact forces. Applied Acoustics 74, 9 (2013) 1085–1093. [CrossRef] [Google Scholar]
  27. K. Valentín, R. Huber-Mörk, S. Stolc: Binary descriptor-based dense line-scan stereo matching. Journal of Electronic Imaging 26, 1 (2017) 1–12. [Google Scholar]
  28. R. Szeliski: Computer Vision. Springer, London, 2011. [CrossRef] [Google Scholar]
  29. International Organization for Standardization, ISO 13473-1:2019: of pavement texture by use of surface profiles – Part 1: Determination of mean profile depth. Geneva, 2019. [Google Scholar]
  30. T. Beckenbauer, P. Spiegler, G. van Blokland: Einfluss der Fahrbahntextur auf das Reifen-Fahrbahn-Geräusch. Bundesministerium für Verkehr, Bau- und Wohnungswesen und Forschungsgesellschaft für Strassen- und Verkehrswesen FGSV, Heft 847, Bonn (Germany), 2002. [Google Scholar]
  31. G. James, D. Witten, T. Hastie, R. Tibshirani: An Introduction to Statistical Learning. Springer, New York, 2013. [CrossRef] [Google Scholar]
  32. A. Liaw, M. Wiener: Classification and regression by randomforest. R News 2, 3 (2002) 18–22. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.