Open Access
Original Article

Table D2

Physical and technological parameters involved in creep model in model 1 of Table 3. Typical values are chosen in accordance with Table 3.1 from [17].

LabelDescriptionValueUnit
NC Wire turns 100 d.u.
AC Coil height 2 × 10−2 m
DC Coil diameter 2 × 10−2 m
τec Eddie-currents time 10−4 s
μ0 Vacuum permeability 4π10−7 H m−1
Air susceptibility 3.6 × 10−7 d.u.
Overhang in (24) 5 × 10−3 m
Shape in (24) 5 d.u.
αleak Leakage area ratio 10−2 d.u.
LP Path inductance LCLleak H
SG Air gap flux area πDCAC m2
SP Pole piece flux area SG m2
Sleak Leakage area (12) m2
ψM Magnet mmf (17) A
ϕss Steady-state flux Wb
Cleak Leakage capacity H
Lleak Leakage inductance Sect. 4.1 H

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.