Open Access
Scientific Article
Issue
Acta Acust.
Volume 6, 2022
Article Number 16
Number of page(s) 12
Section Building Acoustics
DOI https://doi.org/10.1051/aacus/2022012
Published online 25 April 2022
  1. B.M. Gibbs, M. Villot: Structure-borne sound in buildings: Advances in measurement and prediction methods. Noise Control Engineering Journal 68, 1 (2020) 1–20. [CrossRef] [Google Scholar]
  2. EN 15657-1:2009: Acoustic properties of building elements and of buildings – Laboratory measurement of airborne and structure borne sound from building equipment – Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example. [Google Scholar]
  3. EN12354-5:2009: Building acoustics – Estimation of acoustic performance of building from the performance of elements – Part 5: Sounds levels due to the service equipment. [Google Scholar]
  4. J. Scheck, M. Chamaoun, H.-M. Fischer, B. Gibbs: Preparation of a round robin on the reception plate method to characterise structure-borne sound sources in buildings, in Proceedings of Inter-Noise, Lisbon, 13–16 June, 2010. [Google Scholar]
  5. V. Wittstock, M. Villot, J. Scheck: Results of a round robin on structure-borne sound power, in Proceedings of FORUM ACUSTICUM, AAlborg, 26 June – 1 July, 2011. [Google Scholar]
  6. EN15657:2017: Acoustic properties of building elements and of buildings – Laboratory measurement of structure-borne sound from building service equipment for all installation conditions. [Google Scholar]
  7. Pr EN 12354-5:2021(E): Building acoustics – Estimation of acoustic performance of building from the performance of elements – Part 5: Sounds levels due to the service equipment (Document distributed for enquiry to the European countries represented in CEN TC 126). [Google Scholar]
  8. B.M. Gibbs, N. Qi, A.T. Moorhouse: A practical characterisation for vibro-acoustic sources in buildings. Acta Acustica United with Acustica 93 (2007) 84–93. [Google Scholar]
  9. A.R. Mayr, B.M. Gibbs: Single equivalent approximation for multiple contact structure-borne sound sources in buildings. Acta Acustica United with Acustica 98 (2012) 402–410. [CrossRef] [Google Scholar]
  10. I. Fischer, J. Scheck, B. Zeitler: Charakterisierung von Klimageräten als Körperschallquellen, in Proceedings of DAGA, Munich, 19–22 March, 2018. [Google Scholar]
  11. A.T. Moorhouse, B.M. Gibbs: The relative contributions of forces and moments in structure-borne sound power emission from machines, in Proceedings of Inter-Noise, Yokohama, 29–31 August, 1994, pp. 645–648. [Google Scholar]
  12. J. Scheck, B.M. Gibbs: Impacted lightweight stairs as structure-borne sound sources. Applied Acoustics 90 (2015) 9–20. [CrossRef] [Google Scholar]
  13. S. Öhler, B. Kaltbeitzel: Latest results on the characterization of waste water pipes according to the draft EN 14366, in Proceedings of Euronoise, Madeira, 25–27 October, 2021, pp. 1708–1717. [Google Scholar]
  14. ISO 7626 Series: Mechanical vibration and shock – Experimental determination of mechanical mobility. 2011. [Google Scholar]
  15. EN12354-2:2017: Building acoustics – Estimation of acoustic performance of buildings from the performance of elements – Part 2: Impact sound insulation between rooms. [Google Scholar]
  16. A. Vogel, O. Kornadt, V. Wittstock, W. Scholl: Assessment of the uncertainties using the “two-stage method” for the characterization of structure-borne sound sources, in Proceedings of Inter-Noise, San Francisco, 9–12 August, 2015. [Google Scholar]
  17. A. Vogel, O. Kornadt, V. Wittstock, W. Scholl: Application of the two-stage method on the characterization of different structure-borne sound sources and a moment actuator, in Proceedings of Inter-Noise, Innsbruck, 15–18 September, 2013. [Google Scholar]
  18. ISO 10140-5:2021: Acoustics – Laboratory measurement of sound insulation of building elements – Part 5: Requirements for test facilities and equipment. [Google Scholar]
  19. V. Wittstock: On the spectral shape of the sound generated by standard tapping machines. Acta Acustica United with Acustica 98 (2012) 301–308. [CrossRef] [Google Scholar]
  20. ISO12999-1:2020: Acoustics – Determination and application of measurement uncertainties in building acoustics – Part 1: Sound insulation. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.